It is impossible to pass Microsoft 70 980 pdf exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Microsoft exam 70 980 practice questions. You will get a surprising result by our Far out Recertification for MCSE: Server Infrastructure practice guides.
Q1. DRAG DROP - (Topic 7)
You need to prepare for the migration of virtual machines across the Hyper-V hosts of Customer2.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Q2. - (Topic 9)
Your network contains an Active Directory forest named contoso.com. The forest contains five domains. You need to ensure that the CountryCode attribute is replicated to the global catalog.
What should you do?
A. Modify the schema partition.
B. Create and modify an application partition.
C. Modify the configuration partition.
D. Modify the domain partitions.
Q3. - (Topic 9)
Your company has a main office. The main office is located in a building that has 10 floors.
A datacenter on the ground floor contains a Windows Server 2012 failover cluster. The failover cluster contains a DHCP server resource named DHCP1. All client computers receive their IP addresses from DHCP1. All client computers are part of the 188.8.131.52/16 IPv4 subnet.
You plan to implement changes to the network subnets to include a separate subnet for each floor of the office building. The subnets will connect by using routers.
You need to recommend changes to the DHCP infrastructure to ensure that all of the client computers can receive their IP configuration by using DHCP.
What should you recommend?
More than one answer choice may achieve the goal. Select the BEST answer.
A. Install a remote access server on each floor. Configure a DHCP relay agent on each new DHCP server. Create a scope for each subnet on DHCP1.
B. Install a DHCP server on each floor. Create a scope for the local subnet on each new DHCP server. Enable DHCP Failover on each new DHCP server.
C. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for each subnet on DHCP1.
D. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for the 10.0.0.0/16 subnet on DHCP1.
http://technet.microsoft.com/en-us/library/cc771390.aspx Excerpt: In TCP/IP networking, routers are used to interconnect hardware and software used on different physical network segments called subnets and forward IP packets between each of the subnets. To support and use DHCP service across multiple subnets, routers connecting each subnet should comply with DHCP/ BOOTP relay agent capabilities described in RFC 1542.
Q4. - (Topic 10)
Your network contains the following:
20 Hyper-V hosts
100 virtual machines
2,000 client computers
You need to recommend an update infrastructure design to meet the following requirements:
. Deploy updates to all of the virtual machines and the client computers from a single console.
. Generate reports that contain a list of the applied updates.
What should you recommend? More than one answer choice may achieve the goal. Select the BEST answer.
A. One Windows Server Update Services (WSUS) server integrated with Microsoft System Center 2012 Configuration Manager and a second WSUS server that is integrated with Microsoft System Center 2012 Virtual Machine Manager (VMM)
B. One Windows Server Update Services (WSUS) server integrated with Microsoft System Center 2012 Virtual Machine Manager (VMM)
C. One Windows Server Update Services (WSUS) server integrated with Microsoft System Center 2012 Configuration Manager, a second WSUS server integrated with Microsoft System Center 2012 Virtual Machine Manager (VMM), and a third standalone WSUS server.
D. One Windows Server Update Services (WSUS) server integrated with Microsoft System Center 2012 Configuration Manager and Microsoft System Center 2012 Virtual Machine Manager (VMM)
Q5. HOTSPOT - (Topic 6)
You need to recommend a design that meets the technical requirements for managing the Hyper-V hosts by using VMM.
What should you recommend? To answer, select the appropriate options in the answer area.
Q6. - (Topic 9)
Your network contains an Active Directory domain named contoso.com.
On several organizational units (OUs), an administrator named Admin1 plans to delegate control of custom tasks. You need to ensure that Admin1 can delegate a custom task named Task1 by using the Delegation of Control Wizard.
What should you do?
A. Add a new class to the Active Directory schema.
B. Configure a custom MMC console.
C. Modify the Delegwiz.inf file.
D. Configure a new authorization store by using Authorization Manager.
Q7. - (Topic 8)
You need to recommend a solution that meets the notification requirements.
Which System Center 2012 components should you include in the recommendation?
A. Service Manager, Orchestrator and App Controller
B. Configuration Manager, Service Manager and Orchestrator
C. App Controller, Configuration Manager and Operations Manager
D. Operations Manager, Service Manager and Orchestrator
Q8. - (Topic 10)
Your company has a main office and a branch office. Each office contains several hundred computers that run Windows 2012.
You plan to deploy two Windows Server Update Services (WSUS) servers. The WSUS servers will be configured as shown in the following table.
You need to implement the WSUS infrastructure to meet the following requirements:
. All updates must be approved from a server in the main office.
. All client computers must connect to a WSUS server in their local office.
What should you do? (Each correct answer presents part of the solution. Choose all that apply.
A. Deploy a Group Policy object (GPO) that has the update location set to Server1.
B. On Server2, configure WSUS in Replica mode.
C. On Server1, configure WSUS in Replica mode.
D. On Server2, configure WSUS in Autonomous mode.
E. Deploy a Group Policy object (GPO) that has the update location set to Server2.
F. On Server1, configure WSUS in Autonomous mode.
Q9. Topic 1, Contoso Ltd (A)
Contoso, Ltd., is a healthcare company in Europe that has 2,000 users. The company is migrating to Windows Server 2012.
The company has two main offices and two branch offices. The main offices are located in Paris and Amsterdam. One of the branch offices is a sales office located in Berlin. The other branch office is a research office located in Brussels.
The offices connect to each other by using a WAN link.
The network contains an Active Directory forest named contoso.com. An Active Directory site exists for each office.
The forest contains a child domain named research.contoso.com.
The functional level of both the domains is Windows Server 2008.
In each site, there are two domain controllers for the contoso.com domain and two domain controllers for the research.contoso.com domain. The domain controllers run Windows Server 2008 R2.
All of the domain controllers are global catalog servers.
The FSMO roles were not moved since the domains were deployed.
All servers run Windows Server 2008 R2.
Each user has a laptop computer that runs Windows 7.
The company has 10 print servers. Each print server contains several shared printers.
The company has 10 file servers that have the following disk configurations:
A simple volume named C that is the System and Boot volume and is formatted NTFS A mounted virtual hard disk (VHD) named DATA that is formatted NTFS A simple volume named D that is formatted FAT32 A simple volume named E that is formatted NTFS A Clustered Shared Volume (CSV)
The Paris office contains a server named PA1. The Amsterdam office contains a server named AM1. Both servers have the following server roles installed:
DNS Server DHCP Server
The DNS servers are configured to use the DNS servers of the company's Internet Service Provider (ISP) as forwarders.
Users often work remotely. The users access the internal network by using an SSTP-based VPN connection.
Requirements Planned Changes
The company plans to implement the following changes:
Create a child domain named sales.contoso.com. Only the domain controllers in sales.contoso.com will host a zone for the sales.contoso.com domain. The domain controllers in sales.contoso.com will run Windows Server 2012. The client computers in sales.contoso.com will use the sales.contoso.com domain controllers as their DNS servers.
Implement two servers in the Amsterdam office and two servers in the Paris office to replace PA1 and AMI. These new servers will run Windows Server 2012 and will not have shared storage.
Decommission the research.contoso.com domain. All of the users and the Group Policy objects (GPOs) in research.contoso.com will be migrated to contoso.com.
Migrate the existing print queues to virtualized instances of Windows Server 2012.
Migrate the file servers to new servers that run Windows Server 2012.
Implement RADIUS authentication for VPN connections.
Deploy Windows Server 2012 to all new servers.
The company identifies following technical requirements:
All changes to Group Policies must be logged.
Network Access Protection (NAP) policies must be managed centrally.
Core networking services in each office must be redundant if a server fails.
The possibility of IP address conflicts during the DHCP migration must be minimized.
A central log of the IP address leases and the users associated to those leases must be created.
All of the client computers must be able to resolve internal names and internet names.
Administrators in the Paris office need to deploy a series of desktop restrictions to the entire company by using Group Policy.
The new sales.contoso.com domain will contain a web application that will access data from a Microsoft SQL Server located in the contoso.com domain. The web application must use integrated Windows authentication. Users' credentials must be passed from the web applications to the SQL Server.
After the planned upgrade to Windows Server 2012, you restore a user account from the Active Directory Recycle Bin.
You need to replicate the restored user account as quickly as possible.
Which cmdlets should you run?
A. Get-ADReplicationSite and Set-ADReplicationConnection
B. Get-ADReplicationAttributeMetadata and Compare-Object
C. Get-ADReplicationUpToDatenessVectorTable and Set-ADReplicationSite
D. Get ADDomainController and Sync-ADObject
D:\\Documents and Settings\\useralbo\\Desktop\\1.jpg
The Get-ADDomainController cmdlet gets the domain controllers specified by the parameters. You can get domain controllers by setting the Identity, Filter or Discover parameters. The Identity parameter specifies the domain controller to get. You can identify a domain controller by its GUID, IPV4Address, global IPV6Address, or DNS host name. You can also identify a domain controller by the name of the server object that represents the domain controller, the Distinguished Name (DN) of the NTDS settings object or the server object, the GUID of the NTDS settings object or the server object under the configuration partition, or the DN of the computer object that represents the domain controller. You can also set the Identity parameter to a domain controller object variable, such as $<localDomainControllerObject>, or pass a domain controller object through the pipeline to the Identity parameter. To search for and retrieve more than one domain controller, use the Filter parameter. The Filter parameter uses the PowerShell Expression Language to write query strings for Active Directory.
PowerShell Expression Language syntax provides rich type conversion support for value types received by the Filter parameter. For more information about the Filter parameter syntax, see about_ActiveDirectory_Filter. You cannot use an LDAP query string with this cmdlet. To get a domain controller by using the discover mechanism of DCLocator, use the Discover parameter. You can provide search criteria by setting parameters such as Service, SiteName, DomainName, NextClosestSite, AvoidSelf, and ForceDiscover. http://technet.microsoft.com/en-us/library/hh852293.aspx
Detailed Description The Sync-ADObject cmdlet replicates a single object between any two domain controllers that have partitions in common. The two domain controllers do not need to be direct replication partners. It can also be used to populate passwords in a read-only domain controller (RODC) cache. http://technet.microsoft.com/en-us/library/hh852296.aspx
Q10. - (Topic 10)
Your network contains five servers that run Windows Server 2012 R2.
You install the Hyper-V server role on the servers. You create an external virtual network switch on each server.
You plan to deploy five virtual machines to each Hyper-V server. Each virtual machine will have a virtual network adapter that is connected to the external virtual network switch and that has a VLAN identifier of 1.
Each virtual machine will run Windows Server 2012 R2. All of the virtual machines will run the identical web application.
You plan to install the Network Load Balancing (NLB) feature on each virtual machine and join each virtual machine to an NLB cluster. The cluster will be configured to use unicast only.
You need to ensure that the NLB feature can distribute connections across all of the virtual machines.
Solution: From the properties of each virtual machine, you enable MAC address spoofing for the existing virtual network adapter.
Does this meet the goal?