Q121. - (Topic 9) 

Your network contains an Active Directory domain named contoso.com. The domain contains 10 sites. The sites are located in different cities and connect to each other by using low-latency WAN links. 

In each site, you plan to implement Microsoft System Center 2012 Configuration Manager and to deploy multiple servers. 

You need to recommend which Configuration Manager component must be deployed to each site for the planned deployment. 

What should you include in the recommendation? 

More than one answer choice may achieve the goal. Select the BEST answer. 

A. A management point 

B. A software update point 

C. A distribution group point 

D. A secondary site server that has all of the Configuration Manager roles installed 

Answer:

Explanation: 

http://technet.microsoft.com/en-us/library/hh427335.aspx Distribution point groups provide a logical grouping of distribution points and collections for content distribution. A Distribution point group is not limited to distribution points from a single site, and can contain one or more distribution points from any site in the hierarchy. When you distribute content to a distribution point group, all distribution points that are members of the distribution point group receive the content. 


Q122. - (Topic 9) 

Your network contains 50 servers that run Windows Server 2003 and 50 servers that run Windows Server 2008. 

You plan to implement Windows Server 2012 R2. 

You need to create a report that includes the following information: 

. The servers that run applications and services that can be moved to Windows 

Server 2012 R2 

. The servers that have hardware that can run Windows Server 2012 R2 

. The servers that are suitable to be converted to virtual machines hosted on Hyper-

V hosts that run Windows Server 2012 R2 

Solution: You install Windows Server 2012 R2 on a new server, and then you run Microsoft Deployment Toolkit (MDT) 2012. 

Does this meet the goal? 

A. Yes 

B. No 

Answer:


Q123. - (Topic 10) 

Your network contains an Active Directory Rights Management Services (AD RMS) cluster named Cluster1. 

You plan to change Cluster1 to a new AD RMS cluster named Cluster2. 

You need to ensure that all users retrieve the location of the AD RMS templates from Cluster2. 

What should you do? 

A. Modify the Service Connection Point (SCP). 

B. Modify the exclusion policies. 

C. Modify the templates file location of the rights policy templates. 

D. Create an alias (CNAME) record named Cluster1.contoso.com that points to Cluster2. 

Answer:


Q124. - (Topic 10) 

Your network contains five servers that run Windows Server 2012 R2. 

You install the Hyper-V server role on the servers. You create an external virtual network switch on each server. 

You plan to deploy five virtual machines to each Hyper-V server. Each virtual machine will have a virtual network adapter that is connected to the external virtual network switch and that has a VLAN identifier of 1. 

Each virtual machine will run Windows Server 2012 R2. All of the virtual machines will run the identical web application. 

You plan to install the Network Load Balancing (NLB) feature on each virtual machine and join each virtual machine to an NLB cluster. The cluster will be configured to use unicast only. 

You need to ensure that the NLB feature can distribute connections across all of the virtual machines. 

Solution: From the properties of each virtual machine, you enable MAC address spoofing for the existing virtual network adapter. 

Does this meet the goal? 

A. Yes 

B. No 

Answer:


Q125. HOTSPOT - (Topic 4) 

You are planning the certificates for Northwind Traders. 

You need to identify the certificate configurations required for App1. 

How should you configure the certificate request? To answer, select the appropriate 

options in the answer area. 

Answer: 


Q126. - (Topic 1) 

You implement and authorize the new DHCP servers. You import the server configurations and the scope configurations from PA1 and AM1. 

You need to ensure that clients can obtain DHCP address assignments after you shut down PA1 and AM1. The solution must meet the technical requirements. 

What should you do? 

A. Run the Get-DhcpServerv4Lease cmdlet and the Remove-DhcpServerv4Lease cmdlet. Run the Windows Server Migration Tools. 

B. Run the Get-DhcpServerv4Lease cmdlet and the Add-DhcpServerv4Lease cmdlet. Activate the scopes. 

C. Run the Get-DhcpServerv4FreeIPAddress cmdlet and the Invoke-DhcpServerv4FailoverReplication cmdlet. Run the Windows Server Migration Tools. 

D. Run the Get-DhcpServerv4FreeIPAddress cmdlet and the Invoke-DhcpServerv4FailoverReplication cmdlet Activate the scopes. 

Answer:


Q127. - (Topic 3) 

You need to recommend a solution that meets the security requirements. 

Which schema attribute properties should you recommend modifying? 

A. isIndexed 

B. searchFlags 

C. isCriticalSystemObject 

D. schemaFlagsEx 

Answer:

Explanation: 

D:\Documents and Settings\useralbo\Desktop\1.jpg 

Applies To: Windows Server 2008, Windows Server 2012 This topic includes procedures for adding an attribute to the filtered attribute set (FAS) for a readonly domain controller (RODC) and marking the attribute as confidential data. You can perform these procedures to exclude specific data from replicating to RODCs in the forest. Because the data is not replicated to any RODCs, you can be assured that the data will not be revealed to an attacker who manages to successfully compromise an RODC. In most cases, adding an attribute to the RODC FAS is completed by the developer of the application that added the attribute to the schema. 

. Determine and then modify the current searchFlags value of an attribute 

. Verify that an attribute is added to the RODC FAS 

-Determine and then modify the current searchFlags value of an attribute To add an attribute to an RODC FAS, you must first determine the current searchFlags value of the attribute that you want to add, and then set the following values for searchflags: 

. To add the attribute to the RODC FAS, set the 10th bit to 0x200. 

. To mark the attribute as confidential, set the 7th bit to 0x080. http://technet.microsoft.com/en-us/library/cc754794(v=ws.10).aspx 


Q128. - (Topic 1) 

What method should you use to deploy servers? 

A. WDS 

B. AIK 

C. ADK 

D. EDT 

Answer:

Explanation: http://technet.microsoft.com/en-us/library/hh974416.aspx 


Q129. HOTSPOT - (Topic 6) 

You need to recommend a design that meets the technical requirements for managing the Hyper-V hosts by using VMM. 

What should you recommend? To answer, select the appropriate options in the answer area. 

Answer: 


Q130. - (Topic 9) 

Your company has a main office. The main office is located in a building that has 10 floors. 

A datacenter on the ground floor contains a Windows Server 2012 failover cluster. The failover cluster contains a DHCP server resource named DHCP1. All client computers receive their IP addresses from DHCP1. All client computers are part of the 131.107.0.0/16 IPv4 subnet. 

You plan to implement changes to the network subnets to include a separate subnet for each floor of the office building. The subnets will connect by using routers. 

You need to recommend changes to the DHCP infrastructure to ensure that all of the client computers can receive their IP configuration by using DHCP. 

What should you recommend? 

More than one answer choice may achieve the goal. Select the BEST answer. 

A. Install a remote access server on each floor. Configure a DHCP relay agent on each new DHCP server. Create a scope for each subnet on DHCP1. 

B. Install a DHCP server on each floor. Create a scope for the local subnet on each new DHCP server. Enable DHCP Failover on each new DHCP server. 

C. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for each subnet on DHCP1. 

D. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for the 10.0.0.0/16 subnet on DHCP1. 

Answer:

Explanation: 

http://technet.microsoft.com/en-us/library/cc771390.aspx Excerpt: In TCP/IP networking, routers are used to interconnect hardware and software used on different physical network segments called subnets and forward IP packets between each of the subnets. To support and use DHCP service across multiple subnets, routers connecting each subnet should comply with DHCP/ BOOTP relay agent capabilities described in RFC 1542.