Actualtests offers free demo for 70 980 pdf exam. "Recertification for MCSE: Server Infrastructure", also known as 70 980 pdf exam, is a Microsoft Certification. This set of posts, Passing the Microsoft 70 980 vce exam, will help you answer those questions. The 70 980 pdf Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft 70 980 pdf exams and revised by experts!

Q71. - (Topic 1) 

You are planning the implementation of two new servers that will be configured as RADIUS servers. 

You need to recommend which configuration must be performed on the VPN servers. The solution must meet the technical requirements. 

What should you do on each VPN server? 

A. Add a RADIUS client. 

B. Install the Health Registration Authority role service. 

C. Enable DirectAccess. 

D. Modify the authentication provider. 

Answer:

Explanation: 

D:\Documents and Settings\useralbo\Desktop\1.jpg 


Q72. - (Topic 9) 

Your network contains an Active Directory domain named contoso.com. The domain contains three VLANs. The VLANs are configured as shown in the following table. 

All client computers run either Windows 7 or Windows 8. 

The corporate security policy states that all of the client computers must have the latest 

security updates installed. 

You need to implement a solution to ensure that only the client computers that have all of 

the required security updates installed can connect to VLAN 1. The solution must ensure 

that all other client computers connect to VLAN 3. 

Solution: You implement the VPN enforcement method. 

Does this meet the goal? 

A. Yes 

B. No 

Answer:


Q73. HOTSPOT - (Topic 7) 

You need to recommend changes to allow Customer1 to delegate permissions in its hosting environment to its users. 

Where should you recommend performing each task? To answer, select the appropriate location for each task in the answer area. 

Answer: 


Q74. - (Topic 9) 

Your company has a main office. The main office is located in a building that has 10 floors. 

A datacenter on the ground floor contains a Windows Server 2012 failover cluster. The failover cluster contains a DHCP server resource named DHCP1. All client computers receive their IP addresses from DHCP1. All client computers are part of the 131.107.0.0/16 IPv4 subnet. 

You plan to implement changes to the network subnets to include a separate subnet for each floor of the office building. The subnets will connect by using routers. 

You need to recommend changes to the DHCP infrastructure to ensure that all of the client computers can receive their IP configuration by using DHCP. 

What should you recommend? 

More than one answer choice may achieve the goal. Select the BEST answer. 

A. Install a remote access server on each floor. Configure a DHCP relay agent on each new DHCP server. Create a scope for each subnet on DHCP1. 

B. Install a DHCP server on each floor. Create a scope for the local subnet on each new DHCP server. Enable DHCP Failover on each new DHCP server. 

C. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for each subnet on DHCP1. 

D. Configure each router to forward requests for IP addresses to DHCP1. Create a scope for the 10.0.0.0/16 subnet on DHCP1. 

Answer:

Explanation: 

http://technet.microsoft.com/en-us/library/cc771390.aspx Excerpt: In TCP/IP networking, routers are used to interconnect hardware and software used on different physical network segments called subnets and forward IP packets between each of the subnets. To support and use DHCP service across multiple subnets, routers connecting each subnet should comply with DHCP/ BOOTP relay agent capabilities described in RFC 1542. 


Q75. - (Topic 9) 

Your network contains a Hyper-V host named Host1 that runs Windows Server 2012. Host1 contains a virtual machine named DC1. DC1 is a domain controller that runs Windows Server 2012. 

You plan to clone DC1. 

You need to recommend which steps are required to prepare DC1 to be cloned. 

What should you include in the recommendation? (Each correct answer presents part of the solution. Choose all that apply.) 

A. Run dcpromo.exe /adv. 

B. Create a file named Dccloneconfig.xml. 

C. Add DC1 to the Cloneable Domain Controllers group. 

D. Run sysprep.exe /oobe. 

E. Run New-VirtualDiskClone. 

Answer: B,C 

Explanation: 

http://blogs.technet.com/b/askpfeplat/archive/2012/10/01/virtual-domain-controller-cloning-in-windowsserver-2012.aspx DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways. There's a new group in town. It's called Cloneable Domain Controllers and you can find it in the Users container. Membership in this group dictates whether a DC can or cannot be cloned. This group has some permissions set on the domain head that should not be removed. Removing these permissions will cause cloning to fail. Also, as a best practice, DCs shouldn't be added to the group until you plan to clone and DCs should be removed from the group once cloning is complete. Cloned DCs will also end up in the Cloneable Domain Controllers group. Make sure to remove those as well 


Q76. - (Topic 9) 

Your network contains an Active Directory domain named contoso.com. The domain contains three Active Directory sites. The Active Directory sites are configured as shown in the following table. 

The sites connect to each other by using the site links shown in the following table. 

Site link name Connected sites 

You need to design the Active Directory site topology to meet the following requirements: 

. Ensure that all replication traffic between Site2 and Site3 replicates through Site1 if a domain controller in Site1 is available. 

. Ensure that the domain controllers between Site2 and Site3 can replicate if all of the domain controllers in Site1 are unavailable. 

What should you do? 

A. Delete Link1. 

B. Delete Link2. 

C. Delete Link3. 

D. Disable site link bridging. 

E. Create one site link bridge. 

F. Modify the cost of Link2. 

G. Create one SMTP site link between Site2 and Site3. 

H. Create one SMTP site link between Site1 and Site3. Create one SMTP site link between Site1 and Site2. 

Answer:


Q77. HOTSPOT - (Topic 9) 

You have a domain controller that hosts an Active Directory-integrated zone. On the domain controller, you run the following cmdlet: 

PS C:\> Get-DnsServerScavenging NoRefreshlnterval:2.00:00:00 

Refreshlnterval:3.00:00:00 Scavenginglnterval:4.00:00:00 ScavengingState:True LastScavengeTime:1/30/2014 9:10:36 AM 

Use the drop-down menus to select the answer choice that completes each statement. 

Answer: 


Q78. - (Topic 6) 

You are evaluating the use of VMM to migrate APP1 for the sales users. You need to identify the effects of the migration. 

What should you identify? 

A. The VHDs and the virtual machine configuration files will move. The sales users' access to APP1 will be interrupted. 

B. The VHDs will move but the virtual machine configuration files will remain in the original location. The sales users will continue to have uninterrupted access to APP1. 

C. The virtual machine configuration files will move but the VHDs will remain in the original location. The sales users' access to APP1 will be interrupted. 

D. The VHDs and the virtual machine configuration files will move. The sales users will continue to have uninterrupted access to APP1. 

Answer:


Q79. - (Topic 9) 

Your network contains an Active Directory forest named contoso.com. The forest functional level is Windows Server 2012. 

The forest contains an Active Directory domain. The domain contains a global security group named GPO_Admins that is responsible for managing Group Policies in the forest. 

A second forest named fabrikam.com contains three domains. The forest functional level is Windows Server 2003. 

You need to design a trust infrastructure to ensure that the GPO_Admins group can create, edit, and link Group Policies in every domain of the fabrikam.com forest. 

What should you include in the design? 

More than one answer choice may achieve the goal. Select the BEST answer. 

A. A two-way forest trust 

B. A one-way forest trust 

C. Three external trusts 

D. Three shortcut trusts 

Answer:


Q80. - (Topic 10) 

Your network contains five Active Directory forests. 

You plan to protect the resources in one of the forests by using Active Directory Rights 

Management Services (AD RMS). 

Users in all of the forests will access the protected resources. 

You need to identify the minimum number of AD RMS clusters required for the planned 

deployment. 

What should you identify? 

A. Five root clusters 

B. Five licensing clusters 

C. One licensing cluster and five root clusters 

D. One root cluster and five licensing clusters 

Answer: